tractor spraying agrochemical in crop field

Fungicides are a type of agrochemical used specifically to kill fungal pathogens or inhibit the growth of fungi and the spores that they produce. They full under the umbrella of plant protection products (PPPs), also referred to as pesticides, along with other agrochemicals such as herbicides and insecticides that target weeds and insect pests respectively. 

Prior to the development of fungicides, there are many historic cases of pathogenic fungi devastating crop yields - one of the most famous being the Irish Potato famine of 1845-52. This was caused by the potato late blight fungal pathogen Phytophthora infestans which today still causes massive losses to agriculture globally, although management by fungicides is now an important component of control. 

A wide variety of fungicides exist with various modes of action (MOAs) to effectively control many fungal diseases including mildews, rusts, blights and leaf spots. A threat to modern agriculture is the development and spread of resistance to such fungicides amongst fungal populations.

Click the 'Ask to Join' button if you would like to add to the content of this topic and provide a summary of current knowledge and recommend useful resources, organisations, networks and projects.

 

Related Organisations

Content below is from across the PEP community and is not necessarily endorsed by Stewards or by PEP

Connected Content

Commonly known as Septoria or Septoria leaf blotch, this is the most damaging foliar disease in the UK for Winter Wheat. With a carefully constructed fungicide programme and use of Integrated Pest Management (IPM), disease pressure can be managed and losses greatly reduced.  

Diseases infect susceptible plant hosts, where environmental conditions favor disease development. Infected crops achieve lower yields and the quality of the produce can also be affected.

Crop protection refers to practices and measures employed in agriculture to safeguard crops from both biotic (pests, diseases and weeds) and abiotic (environmental factors) stresses. They key goal of crop production is to maintain crop productivity, health and quality whilst minimising yield losses.

Cereal diseases affecting wheat, barley, oats, rye, triticale and maize can be caused by a variety of factors, including fungal, bacterial or viral infections, pests and insects, and environmental stress.

Crop profitability depends on maximising margins, rather than yield alone. Deciding on the optimum crop protection strategy in the spring requires judgement of the variety, its situation, and how yield affecting diseases can be controlled. ADAS with the support of the AHDB and the wider industry set up the first Fungicide Margin challenge in 2019. Since then a total of 10 trials have been carried out over 3 years, allowing entrants to pit innovative strategies against others, against an ADAS experts' programme and against an untreated crop in replicated plot trials. The aim being to achieve the highest margin over fungicide cost.   

Insecticides are a type of agrochemical used to kill, harm or deter insects that either directly infect cultivated plants/animals or that are carriers of disease. In agricultural settings, insecticides may be used in both arable and livestock husbandry situations. The classification of insecticides can occur in various ways: via their biochemical mode of action, their mode of penetration or on the basis of their chemistry. They can also come in various formulations and delivery-systems such as sprays, gels or baits.

The application of agrochemicals by modern crop sprayers involves sophisticated technologies applied by skilled operators.

Enviresearch exists to provide the best regulatory and risk assessment service in Europe for the global chemical industry.

Light leaf spot (LLS) is a disease of oilseed rape and some vegetable brassicas, caused by the fungus, Pyrenopeziza brassicae. This major foliar pathogen is notoriously difficult to identify with an airborne polycyclic lifecycle – capable of several infection cycles a season, making it hard to control as reinfection is constantly occurring. Severity can be suppressed through monitoring, cultural controls, and targeted fungicide applications.

Scientific paper in Field Crops Research published by the ADAS Agronomics team reporting experience working with BASF Real Results farmers conducting around 50 on-farm Line Trials per year.

There has been a spate of reported sprayer problems from applications of T2 sprays with new fungi

The AHDB Recommended List is part of the fabric of arable farming and is the engine drivi

Leaf disease may have been the least of oilseed rape growers’ problems recently but remain a pote

Phoma stem canker is a damaging disease of oilseed rape (Brassica napus) that causes annual yield

BASF Real Results Circle (https://basfrealresults.co.uk/) has been running since 2017, bringing together 50 farmers and supporting them to test decisions on-farm.

Agrochemicals are chemical products used for agricultural purposes. Although agrochemicals have high input costs, they are widely used in the farming industry for their beneficial effects on crop yields and quality and associated reduced labour costs. Together with advances in agricultural machinery and infrastructure, the use of agrochemicals played a large role in the Green Revolution. This was a period in the 21st century in which the spread of various agricultural technologies led to greatly increased yields and production globally. However, a number of concerns around agrochemicals exist including negative effects on human health and the environment and the development of pest populations that are becoming resistant to them. A major challenge of modern agriculture is to try and reduce reliance on agrochemicals whilst continuing to increase yields and feed a growing global population.

BASF are running a series of 3 short technical webinars, bringing together experts and industry specialists. We`ll be discussing barley and wheat disease control, but also nitrogen efficiency and return on investments.

Phoma leaf spot and stem canker is one of the most damaging diseases in oilseed rape, caused by two closely related fungal pathogens: Leptosphaeria maculans (Plenodomus lingam) and L. biglobosa (P. biglobosus).

The Fungicide Resistance Action Group (FRAG) produces guidance on pesticide resistance issues. Hosted by AHDB, this information can be used to help protect crops and the long-term efficacy of fungicides.

Lots of people are claiming that better crop nutrition can improve plant resilience and allow red

ADAMA’s prothioconazole fungicide, SORATEL, uses a unique formulation to offer improved disease c

Multi-site fungicides appear to be making a valuable contribution in this year

Write whatever you want here - this is the main section. You can add links, add pictures and embed videos. To paste text from elsewhere use CTRL+Shift+V to paste without formatting. Add videos by selecting 'Full HTML' below, copying the 'embed html' from the source page (eg Youtube), clicking 'Source' above and pasting where you want the video to appear.
You can upload an image here. It can be jpg, jpeg, gif or png format.
Upload requirements

You can upload a file here, such as a pdf report, or MS Office documents, Excel spreadsheet or Powerpoint Slides.

Upload requirements
Authors Order
Add Authors here - you can only add them if they already exist on PEP. Just start writing their name then select to add it. To add multiple authors click the 'Add another item' button below.

Please ensure that you have proof-read your content. Pages are not edited further once submitted and will go live immediately.

Configure the meta tags below.

Use tokens to avoid redundant meta data and search engine penalization. For example, a 'keyword' value of "example" will be shown on all content using this configuration, whereas using the [node:field_keywords] automatically inserts the "keywords" values from the current entity (node, term, etc).

Browse available tokens.

Simple meta tags.

The text to display in the title bar of a visitor's web browser when they view this page. This meta tag may also be used as the title of the page when a visitor bookmarks or favorites this page, or as the page title in a search engine result. It is common to append '[site:name]' to the end of this, so the site's name is automatically added. It is recommended that the title is no greater than 55 - 65 characters long, including spaces.
A brief and concise summary of the page's content, preferably 150 characters or less. Where as the description meta tag may be used by search engines to display a snippet about the page in search results, the abstract tag may be used to archive a summary about the page. This meta tag is no longer supported by major search engines.

Meta tags that might not be needed by many sites.

Geo-spatial information in 'latitude; longitude' format, e.g. '50.167958; -97.133185'; see Wikipedia for details.
Geo-spatial information in 'latitude, longitude' format, e.g. '50.167958, -97.133185'; see Wikipedia for details.
Robots
A comma-separated list of keywords about the page. This meta tag is used as an indicator in Google News.
Highlight standout journalism on the web, especially for breaking news; used as an indicator in Google News. Warning: Don't abuse it, to be used a maximum of 7 times per calendar week!
This meta tag communicates with Google. There are currently two directives supported: 'nositelinkssearchbox' to not to show the sitelinks search box, and 'notranslate' to ask Google not to offer a translation of the page. Both options may be added, just separate them with a comma. See meta tags that Google understands for further details.
Used to rate content for audience appropriateness. This tag has little known influence on search engine rankings, but can be used by browsers, browser extensions, and apps. The most common options are general, mature, restricted, 14 years, safe for kids. If you follow the RTA Documentation you should enter RTA-5042-1996-1400-1577-RTA
Indicate to search engines and other page scrapers whether or not links should be followed. See the W3C specifications for further details.
Tell search engines when to index the page again. Very few search engines support this tag, it is more useful to use an XML Sitemap file.
Control when the browser's internal cache of the current page should expire. The date must to be an RFC-1123-compliant date string that is represented in Greenwich Mean Time (GMT), e.g. 'Thu, 01 Sep 2016 00:12:56 GMT'. Set to '0' to stop the page being cached entirely.

The Open Graph meta tags are used to control how Facebook, Pinterest, LinkedIn and other social networking sites interpret the site's content.

The Facebook Sharing Debugger lets you preview how your content will look when it's shared to Facebook and debug any issues with your Open Graph tags.

The URL of an image which should represent the content. The image must be at least 200 x 200 pixels in size; 600 x 316 pixels is a recommended minimum size, and for best results use an image least 1200 x 630 pixels in size. Supports PNG, JPEG and GIF formats. Should not be used if og:image:url is used. Note: if multiple images are added many services (e.g. Facebook) will default to the largest image, not specifically the first one. Multiple values may be used, separated by a comma. Note: Tokens that return multiple values will be handled automatically. This will be able to extract the URL from an image field if the field is configured properly.
The URL of an video which should represent the content. For best results use a source that is at least 1200 x 630 pixels in size, but at least 600 x 316 pixels is a recommended minimum. Object types supported include video.episode, video.movie, video.other, and video.tv_show. Multiple values may be used, separated by a comma. Note: Tokens that return multiple values will be handled automatically.
A alternative version of og:image and has exactly the same requirements; only one needs to be used. Multiple values may be used, separated by a comma. Note: Tokens that return multiple values will be handled automatically. This will be able to extract the URL from an image field if the field is configured properly.
The secure URL (HTTPS) of an image which should represent the content. The image must be at least 200 x 200 pixels in size; 600 x 316 pixels is a recommended minimum size, and for best results use an image least 1200 x 630 pixels in size. Supports PNG, JPEG and GIF formats. Multiple values may be used, separated by a comma. Note: Tokens that return multiple values will be handled automatically. This will be able to extract the URL from an image field if the field is configured properly. Any URLs which start with "http://" will be converted to "https://".
The type of image referenced above. Should be either 'image/gif' for a GIF image, 'image/jpeg' for a JPG/JPEG image, or 'image/png' for a PNG image. Note: there should be one value for each image, and having more than there are images may cause problems.
The date this content was last modified, with an optional time value. Needs to be in ISO 8601 format. Can be the same as the 'Article modification date' tag.
The date this content was last modified, with an optional time value. Needs to be in ISO 8601 format.
The date this content will expire, with an optional time value. Needs to be in ISO 8601 format.

A set of meta tags specially for controlling the summaries displayed when content is shared on Twitter.

Notes:
  • no other fields are required for a Summary card
  • Photo card requires the 'image' field
  • Media player card requires the 'title', 'description', 'media player URL', 'media player width', 'media player height' and 'image' fields,
  • Summary Card with Large Image card requires the 'Summary' field and the 'image' field,
  • Gallery Card requires all the 'Gallery Image' fields,
  • App Card requires the 'iPhone app ID' field, the 'iPad app ID' field and the 'Google Play app ID' field,
  • Product Card requires the 'description' field, the 'image' field, the 'Label 1' field, the 'Data 1' field, the 'Label 2' field and the 'Data 2' field.
A description that concisely summarizes the content of the page, as appropriate for presentation within a Tweet. Do not re-use the title text as the description, or use this field to describe the general services provided by the website. The string will be truncated, by Twitter, at the word to 200 characters.
By default Twitter tracks visitors when a tweet is embedded on a page using the official APIs. Setting this to 'on' will stop Twitter from tracking visitors.
The URL to a unique image representing the content of the page. Do not use a generic image such as your website logo, author photo, or other image that spans multiple pages. Images larger than 120x120px will be resized and cropped square based on longest dimension. Images smaller than 60x60px will not be shown. If the 'type' is set to Photo then the image must be at least 280x150px. This will be able to extract the URL from an image field if the field is configured properly.
The MIME type for the media contained in the stream URL, as defined by RFC 4337.